Nexus Series
Matched Family of Hi-Fi/HT Speakers
Matched Family of Hi-Fi/HT Speakers
The Nexus designs are a timbre matched family of Hi-Fi/HT speakers all based on the same midwoofer (Dayton DS135-8) and tweeter (ND28F-8).
These designs came about from my interest in building a conventional 3-way design and eventually evolved into a full family of designs sharing the same midbass and tweeter. I wanted to use drivers that would offer very good performance yet keep the cost of the design in reach of those looking not looking to spend an arm and a leg. I also wanted the drivers to match if possible and give a nominal 8 ohm load so it would be safe for even the most anemic AVR or those super cautious users who just don’t want to risk driver a lower impedance speaker. Finally I wanted the midrange/midbass able to be used in a compact two way surround with decent power handling and extension in a small ported enclosure.
I settled on the Dayton ND28F-6 for the tweeter, the Dayton DS135-8 as the midrange/midbass and the Dayton SD215-88A as woofer. These checked all the boxes, they share the same design language, they perform well within their respective bandwidths and they fall well within the budget. Though the drivers have gotten quite a bit more costly since these were originally designed.
Overall I found these designs to be very well rounded and suited for both HiFi and home theater use with a good mix of bass extension and sensitivity. The drivers are certainly not top tier level but perform very well for their cost and the when paired up can provide very impressive output and decent distortion performance. Many years later and the Nexus MTMWW tower still brings a smile to my face when listening to music especially when it has some good bass to show off it's capabilities
Note: After the HiFicicuit forum which hosted the original build thread went down I've created new design pages and and moved over and updated all the info for the various Nexus designs which can now be found below.
Can also be built and used vertically in the WTMW or TMWW format