Embedded Files
Manufacturers Info
Brand: ----
Model: ME10 Clone
Style: Hyperbolic Cosine
Coverage (H x V): 90 x 60
Minimum Frequency: 1500 Hz
Throat: 1"
Mounting Type: 2/3 Bolt
Dimensions: 130.5 x 130.5 x 90 mm (5.1 x 5.1 x 3.5 in)
Additional Notes:
Clone of the B&C ME10 Horn.
Measurements:
Measurements:
Test Notes: Off axis and polars measured using a Celestion CDX1-1731
Mic distance 1m, measurements gated at 4ms and are smoothed at 1/48 Octave.
Horizontal:
Vertical:
Raw Horizontal Off Axis Response
Raw Vertical Off Axis Response
Horizontal Off Axis Response - Normalized to On Axis
Vertical Off Axis Response - Normalized to On Axis
Horizontal Polar Response - Normalized to On Axis
-6dB Coverage Angle Highlighted
Vertical Polar Response - Normalized to On Axis
-6dB Coverage Angle Highlighted
Final Notes:
Here are my notes from the real B&C ME10:
I'd say the measured dispersion is slightly more narrow then the rated 90 x 60. A flare in the response appears around 5khz though this appears only well off axis and is more prominent in the horizontal axis. Otherwise coverage inside the -6dB window is decent within the limitation of this fairly small horn.
This clone ME10 measures almost identically in the vertical axis but has a bit of waistbanding near 4khz on the -6dB line that the real B&C ME10 doesn't. Perhaps some slightly differences in the geometry of the horizontal flare.
Page updated
Google Sites
Report abuse