Embedded Files
Manufacturers Info
Brand: JBL (clone)
Model: 352606-002
Style: ---
Coverage (H x V): 75 x 50
Minimum Frequency: ---Hz
Throat: 1.5"
Mounting Type: 4-bolt
Dimensions (W x H x D): 353mm x 230mm x 150mm
Additional Notes:
Clone of the horn JBL used on their SRX715, SRX722 & SRX725 speakers.
Horn was tested without an adaptor as the throat appeared only a hair larger then the other 1.4" horns tested.
Measurements:
Measurements:
Since the dispersion at the top octave of 1.4" horns is highly dependent of the design of the phase plug and exit angle of the compression driver used I have begun testing each 1.4" horn with several the compression drivers I have. You can find the measurements of this horn with each of these compression drivers below.
Page updated
Google Sites
Report abuse